bigzee
26-05-2011, 10:46 PM
1560156115621563
Sorry folks, but I've just made another alcohol stove and I had to share!
The burner is from the top and bottom of a deodorant can pressed together (syphon pipe knocked out!), and has 16 x holes pierced in top. Tuna can forms windshield/primer plate/potstand base. 3 x wires (old bike spokes) swivel to pot size or removable for packing. Burner has coke can top as skirt - which is only really to centralize burner nicely in tuna can, but does allow primer fuel to get beneath burner also.
A fine nozzle fuel bottle or syringe is needed to fill through central syphon hole, and a hex-head roofing screw thingy spins loosely inside to close down on top (not sure what difference this really makes).
Sorry folks, but I've just made another alcohol stove and I had to share!
The burner is from the top and bottom of a deodorant can pressed together (syphon pipe knocked out!), and has 16 x holes pierced in top. Tuna can forms windshield/primer plate/potstand base. 3 x wires (old bike spokes) swivel to pot size or removable for packing. Burner has coke can top as skirt - which is only really to centralize burner nicely in tuna can, but does allow primer fuel to get beneath burner also.
A fine nozzle fuel bottle or syringe is needed to fill through central syphon hole, and a hex-head roofing screw thingy spins loosely inside to close down on top (not sure what difference this really makes).